loading
Product Description
Single Phase Pad Mounted Transformer Specifications:
· Single-phase up to 167 kVA
· Primary voltage up to 36 kV
· Secondary voltages up to 690 V
· Cooling type: ONAN
· Available Fluids: Mineral Oil, Ester Fluidsand Silicone
Single Phase Pad Mounted Transformer Standards Compliant:
· IEC 60076
· IEEE C57.19.00 /C57.12.00
· ANSI Standard C57.12.00/C57.12.25/ C57.12.90
· it shall comply (but shall not be limited to) with the latest revision of applicable
codes, standards, and other regulations such as ASTM, NEMA, NEC, EQB-PUERTO RICO,
EPA, DOT, AWS, etc.
Single Phase Pad Mounted Transformer Advantage:
· Yuanguang-Intelec utilizes a focus factory concept which leads to a great experience in specific products giving a very high level of consistency in design, manufacture, and test
· Yuanguang-Intelec distribution transformers factories utilize the common design platform giving us best-in-class experience, consistency, and repeatability
· Yuanguang-Intelec utilizes best-in-class manufacturing and quality processes to ensure that our transformers will meet the most stringent requirement
Single Phase Pad Mounted Transformer Applications:
· Yuanguang-Intelec single phase pad mounted transformer include Loop feed type and Radial feed type. They are mounted ground and under ground. These transformers typically service urban and rural residential and commercial loads.
· Yuanguang-Intelec single phase pad mounted transformer are used in underground industrial and residential power distribution systems, for Industrial, Commercial, Institutional and Residential areas, where safety is prime concern.
Single Phase Pad Mounted Transformer Optional Accessories:
· Lifting lug(removeble)
· Parking stand bracket
· LV bushing
· Internal fault derector with Pressure relief valve
· Drain valve
· Ground strap cooper
· Ground pad
· HV bushing inserts
· Ground lugs
· Oil fill valve
· Nameplate
· NEMA Safety lables
· Bayonet fuse with drip pan
· ELSP fuse
· Tap changer(Load Break Switch)
· Oil thermometer
· Oil level gauge
· 200A HV bushing well removable stud 25KV
· RTE type beyonet fuse holder
· Lock mechanism
· Tank ground provisions blackburn TTC2
· Hold down cleats
· Secondary terminal Homac stud connecter
· Insulated drip shields
Single Phase Pad Mounted Transformer Transport Packaging:
· Single-phase transformers are packaged in three ways: wooden pallets, wooden frames, and wooden boxes.
· We generally use wooden box packaging, which can effectively protect the transformer during transportation
· Avoid collisions and keep the shape of the transformer intact
· Avoid corrosion, rust, etc. caused by environmental factors
Single Phase Pad Mounted Transformer Factory Quality Control:
· Raw material inspection
· Fuel tank leak dinspection
· Winding inspection
· Active part inspection
· Finished product factory test
Design Performance Test:
Routine tests will be performed on EACH UNIT
a. Voltage ratio
b. Polarity
c. Phase relationship
d. Core losses (no-load losses)
e. Exciting current
f. Winding losses (load losses)
g. Tank leaks
h. Impedance
i. Applied potential
j. Induced potential
k. Impulse tests
Test Report:
· Type Test Report
· Routine Test Report