Home » Products » Dry Type Transformer » Small Dry Type Transformer » 10kv Dry Type Epoxy On-load Capacity Regulating Transformer


10kv Dry Type Epoxy On-load Capacity Regulating Transformer


Product Description

Dry Type Transformer Overview:

Epoxy resin cast dry-type power transformers are cast using advanced technology, with high product reliability and long service life. And protective shells can be added according to different protection levels. It is suitable for important or special environment places such as high-rise buildings, commercial centers, airports, tunnels, chemical plants, nuclear power plants, etc.

The core is made of high-performance cold-rolled oriented silicon steel sheets and a fully automatic robot lamination machine. It has small shearing burrs and low lamination coefficient, which effectively reduces the no-load loss, no-load current and noise of the transformer. No-load loss is 5%~10% lower than manual lamination.

Dry Type Transformer Application:

Apply to power plant (station), substation (power distribution station) and industrial etc.

Dry Type Vacuum Cast Resin Transformer Specifications:

Capacity: 30kVA~ 2500 kVA

Primary side rated voltage: 6kV~ 35kVA

Secondary side rated voltage: 0.4kV

Tap changer position : 5


Phase: three phases

Connection group: Dyn11/Yyn0 etc.

Impedance: 4%~6%

Dry Transformer Advantage:

1. Safety: Since dry transformers do not contain flammable or toxic liquids that can leak or catch fire.

2. Environmental protection: type power transformers do not use harmful liquids or liquids to work, so they will not release harmful gases into the environment causing greenhouse effect.

3. Low noise: due to the use of laminated iron core technology and multiple layers of insulating paint on the outside of the iron core, the noise of the cast resin dry type transformer is reduced.

4. Low loss: dry-type transformer adopts higher grade silicon steel sheet, which belongs to high energy efficiency grade transformer, the no-load loss is 15% lower than SCB12 transformer, and the load loss is 10% lower than SCB12 transformer

5. Low installation cost: small size, light weight, less space occupation, no need for fire extinguishing system and low installation cost.

6. Maintenance: Since the dry-type transformer does not use liquid for filling and the use of accessories, it requires almost no maintenance.

7. Sustainability: small partial discharge (usually below 10PC), high reliability, long-term safe operation can be guaranteed, and the service life can reach 30 years.

8. Good heat dissipation effect: the composite insulation composed of pure resin and glass fiber has extremely high electrical strength, which improves the heat dissipation efficiency of the winding surface.

Dry Type Distribution Transformer Fittings:

1. Safe, fireproof, non-polluting, and can be directly operated in the load center;

2. Adopt domestic advanced technology, high mechanical strength, strong short-circuit resistance, small partial discharge, good thermal stability, high reliability and long service life;

3. Low loss, low noise, obvious energy saving effect, maintenance-free;

4. Good heat dissipation performance, strong overload capacity, and can increase capacity operation when forced air cooling;

5. Good moisture-proof performance, suitable for operation in high humidity and other harsh environments;

6. Dry-type transformers can be equipped with a complete temperature detection and protection system. The intelligent signal temperature control system is adopted, which can automatically detect and display the respective working temperature of the three-phase windings, can automatically start and stop the fan, and has function settings such as alarm and trip;

7. Small size, light weight, less space occupation, low installation cost.

Indoor d Dry Type Transformer Transport Packaging:

• Single-phase transformers are packaged in three ways: wooden pallets, wooden frames, and wooden boxes.

• We generally use wooden box packaging, which can effectively protect the transformer during transportation

• Avoid collisions and keep the shape of the transformer intact

• Avoid corrosion, rust, etc. caused by environmental factors

Dry Type Transformer Manufacturers:

SOURCEWAY engineers have 40 years of experience in the transformer industry and have accumulated a wealth of experience in participating in different projects in various countries. Based on project cooperation cases, Sourceway can help you analyze the types of transformers you need in project construction and provide complete power distribution and other solutions.

linkedin sharing button
whatsapp sharing button
facebook sharing button
twitter sharing button
pinterest sharing button
line sharing button
wechat sharing button
sharethis sharing button
Established in 2006
Social Media
Product Category
Power Transformer
Contact Info
 Phone: +86 18057699597
 WhatsApp: +86 18057699597
WeChat: +86 18057699597
 Add: No.1 Xinggong 8 Rd., Jiangshan, Zhejiang, China
Contact Us
Copyright @ 2023 Zhejiang SourceWay Electric Co., Ltd. All Rights Reserved  Sitemap | Support  By Leadong | Privacy Policy